Filters
Liquid Separator – Filter Separator – Solid Filter – Cyclone Filter
Product Information
Unwanted dust, fiber, rust, etc. in natural gas, compressed gas and other gases. particles can be found. These parts must be disposed of so that they do not cause damage or are dangerous.
Filter cartridge selection is determined by the particle size and percentage requested by the customer. Thus, the purity of the gas after the filter increases and therefore equipment such as regulators and meters are protected from possible damage or premature wear.
Filters ASME Code VIII Div. It is made in accordance with the customer’s demands in accordance with the 1 standards. All of our Filters have a heat number, the main components are of the sealed material type, and the basic materials are steelwork certification.
Liquid Seperator - Code (Liquid Separators)
The liquid separator is used to remove liquid and other particles from the fluid. It consists of liquid holders (vane plates or mesh type filter) inside the liquid separator. The fluid, which is under the influence of gravity theory and friction force, is designed in such a way that it can separate at the desired efficiency and desired micron value.
Filter Seperator
Filter separator is used to remove unwanted liquid and solid particles in the fluid. The seperator filter consists of cartridges and liquid traps (vane plates or mesh type filter) inside. It usually has quick-open type covers for maintenance and replacement of filters. The cartridge is designed in such a way that the fluid, which is under the influence of gravity theory and friction force, can separate at the desired efficiency and desired micron value.
Solid Filter
Thanks to the cartridge inside, it is used to clean the particles in the fluid for final use.
Cyclone Filter
In cyclone filters, particles are separated by density difference by giving vortex movement to the fluid. It works with the kinetic energy (flow current) of the incoming mixture and the geometry of the cyclone.
